Difference between revisions of "9-11/evidence/temperatures"
< 9-11
Jump to navigation
Jump to search
(Created page with "==About== For now, this is a collection of notes about temperatures believed to have been achieved within the WTC fires, and temperatures at which various things happen to materi...") |
m (moved 9-11/anomalies/collapse/temperatures to 9-11/evidence/temperatures: there may not be an "evidence" folder yet, but there should be) |
(No difference)
| |
Revision as of 19:26, 22 July 2011
About
For now, this is a collection of notes about temperatures believed to have been achieved within the WTC fires, and temperatures at which various things happen to materials (especially structural steel) known to have been used in the WTC construction, for comparison purposes.
Definitions
Critical temperature is the temperature at which a structural element cannot safely support its load. (Presumably the size of "load" is based on a rating for that particular material.) This temperature is often defined as the temperature at which the element's yield stress has been reduced to 60% of the room temperature yield stress.
Comparison Table
Numbers in italics have been converted from figures given in the other measure of temperature.
| °C | °F | description |
|---|---|---|
| 452 | hottest temperature achieved in samples metallurgically analyzed by NIST (the samples analyzed were those believed to have been closest to the hottest parts of the fire) | |
| 400 | 752 | in Japan, the critical temperature is apparently considered to be below this (Wikipedia, no source) |
| 538 | 1000 | lower end of critical temperature in China, Europe and North America (e.g., ASTM E-119) (Wikipedia citing offline source) |
| 1200 | structural steel reportedly loses half its strength (source?) | |
| 1300 | upper end of critical temperature in China, Europe and North America (e.g., ASTM E-119) (Wikipedia citing offline source) | |
| 1700 | maximum temperature of open flame | |
| 1800 | hottest temperature claimed in NIST report (not supported by their own metallurgic analysis of actual samples) | |
| 2000 | fire-rating of steel used in WTC construction, good for 6 hours |